General Steps of Configuration

1, 2

3

4, 5

6

• CONF_DONE Released, Pulled High when Configuration Is Complete

• FLEX Device Still Needs to be Clocked 10 Times for Initialization
  • Registers Reset
  • User I/O Enabled
  • Operation Begins

• Device Enters User Mode

• To Reconfigure Device, Pulse nCONFIG Low then High
  • All User I/O Pins Will Tri-State starting with nCONFIG going low

이전 슬라이드

다음 슬라이드

첫 슬라이드로 이동

그래픽 버전 보기