Loading Files

Files are loaded from the Constraints Editor main window or from the command line at invocation (see the “Starting the Constraints Editor” section in the "Getting Started" chapter for command line syntax).

Figure 4.1 Constraints Editor Main Window

1. Click Open from the File menu on the Constraints Editor main window. The Open dialog box appears.
   
   

   Figure 4.2 Open Dialog Box

2. From the Open dialog box, select the directory from the Look in pull-down list, then select an NGD file name from the list box.
   
   Alternately, you can type a path in the File name text box.
   
   
3. Click Open.
   
   

NOTE

A UCF of the same name as the NGD file is loaded automatically. After you have an NGD file open, you can also open a UCF using the same method described above, only selecting UCF as the file type.