The toolbar provides convenient access to frequently used commands. Click once on a toolbar button to execute a command.
If you position the mouse pointer over a toolbar button, a short description appears next to the button and a longer description appears in the status bar at the bottom of the main window.
This section briefly describes the function of each toolbar button and includes a graphic of each button.
The New button creates a new project. It is equivalent to the File 
New Project command.
The Open button opens an existing project. It is equivalent to the File Open Project command.
The Save button saves the document. It is equivalent to the File Save command.
The Close button closes the project, macro, or waveform. It is equivalent to the File Close command.
The Run Macro executes the selected macro. It is equivalent to the File Run Macro command.
The Download Design button downloads the configuration data to your target device or chain of devices. It is equivalent to the Download Download Design command.
The Download Design and Verify button downloads the design file to your target device and verifies that the design was downloaded correctly. It is equivalent to the Download Download and Verify command.
The Verify Bitstream button verifies that the design was downloaded correctly. It is equivalent to the Download Verify Bitstream command.
The Readback and Capture button performs readback on a device and stores the data into a file.
The Synchronous Debug button enables the synchronous debug mode. It is equivalent to the Debug Synchronous Mode command.
The Asynchronous Debug button enables the asynchronous debug mode. It is equivalent to the Debug Asynchronous Mode command.
The Waveform Display button displays the readback data graphically. It is equivalent to the View Waveform Data command.
The Text Display button displays the readback data in text format. It is equivalent to the View Text Data command.
The Zoom In button allows you to zoom in on your waveform. It is equivalent to the View Zoom In command.
The Zoom Out button enables you to zoom out from your waveform. It is equivalent to the View Zoom Out command.
The Zoom to Fit button enables you to zoom to fit the screen. It is equivalent to the View Zoom to Fit command.
The Zoom Reset button resets the view to default values.
The Help button invokes context-sensitive help.
