Report

The Report command determines the format of the report output.

This command is equivalent to the Wide Report option in the Report Options dialog box, which is activated by the Options Report Options menu command.

Syntax

The syntax of the Report command is the following.

report {wide|normal}

• Wide sets a format of 132 characters per line, which prevents long component and net names from being truncated.
  
  
• Normal, the default, displays a detailed list of path delays. The width is 80 characters per line. Because normal is the default, it does not appear as an option for the Report Options menu command.
  
  

Abbreviation

You can abbreviate the Report command syntax as follows.

r {w|n}

Example

Following is an example of the Report command.

report wide