 아래의 도표는 왼편에
나열된 Software가 설치된 환경에서 상단의 Software를
설치할 경우 우리가 주의해야하거나, 신경써야 할 부분등을
정리한 상관관계표입니다... 사용자분들은 아래의
표를 숙지하셔야지만이 Xilinx Software간의 충돌없이
원할한 개발환경을 유지하실수 있습니다... 참고로
여러 EDA Tool들에 관심을 가지고 계신분들이라면,
아래의 설명들이 무엇을 의미하는지를 금방 파악하실수
있으리라 생각됩니다...
-> being installed
on PC already <-
|
Foundation ISE 3.1i |
Foundation 3.1i
(ALDEC) |
Alliance 3.1i |
WebPACK 3.1i |
Foundation
2.1i (ALDEC) |
See Note
1.
For Coregen issues
see solution 6366
|
User must
upgrade to 3.1i
User must uninstall
2.1i before installing 3.1i
|
See Note
1.
For Coregen issues
see solution 6366
|
No conflicts
Both tools work
independently
|
Alliance
2.1i |
See Note
1.
For Coregen issues
see solution 6366
|
See Note
1.
For Coregen issues
see solution 6366
|
See Note
1.
For Coregen issues
see solution 6366
|
No conflicts
Both tools work
independently
|
|
WebPACK
2.1i
|
User must manage
PLS_HOME variable
See solution 6688
|
No conflicts
Both tools work
independently
|
No conflicts
Both tools work
independently
|
No conflicts
Both tools work
independently
|
|
Foundation
ISE 3.1i
|
N/A
|
See Note
2.
|
The Alliance Software
is included in Foundation ISE.
This install is
not required.
|
To be determined
|
|
Foundation
3.1i (ALDEC)
|
See Note
2.
|
N/A
|
The Alliance Software
is included in Foundation 3.1i (ALDEC).
This install is
not required.
|
No conflicts
Both tools work
independently
|
|
Alliance
3.1i
|
Foundation ISE
3.1i will utilize the existing Alliance
install.
Only the design
entry tools will be installed.
See Note
3.
|
Foundation 3.1i
(ALDEC) will utilize the existing
Alliance install.
Only the design
entry tools will be installed.
See Note
4.
|
N/A
|
No conflicts
Both tools work
independently
|
WebPACK
3.1i |
To be determined |
No conflicts
Both tools work
independently
|
No conflicts
Both tools work
independently
|
N/A |
Note
1: User must consider the following:
- Both software applications
must be installed in separate directories.
- Only one application
can be running at a time.
- User must set XILINX
variable to point to the current application.
Note
2: Foundation ISE 3.1i installer will only
install the design entry tools and will use the
currently installed Foundation 3.1i (ALDEC) software
for Implementation. Things to note:
- To minimize drive space,
both software applications can be installed
in the same directory.
- If installed in the same
directory, the user is not required to modify
the XILINX variable to point to the current
application.
- There are two separate
copies of FPGA Express installed.
- Foundation
ISE 3.1i: $XILINX\express
- Foundation
3.1i (ALDEC): $XILINX\synth
Note
3: Foundation ISE 3.1i can not open an Alliance
3.1i Project and Design Manager can not open a Foundation
ISE 3.1i Project. Note
4: Foundation (ALDEC) and Alliance can access
a project created by either tool. |
