Previous

FJKC

J-K Flip-Flop with Asynchronous Clear

XC3000
XC4000E
XC4000X
XC5200
XC9000
Spartan
SpartanXL
Virtex
Macro
Macro
Macro
Macro
Macro
Macro
Macro
Macro

figures/x3753n.gif

FJKC is a single J-K-type flip-flop with J, K, and asynchronous clear (CLR) inputs and data output (Q). The asynchronous clear (CLR) input, when High, overrides all other inputs and resets the Q output Low. When CLR is Low, the output responds to the state of the J and K inputs, as shown in the following truth table, during the Low-to-High clock (C) transition.

The flip-flop is asynchronously cleared, output Low, when power is applied. For CPLDs, the power-on condition can be simulated by applying a High-level pulse on the PRLD global net. FPGAs simulate power-on when global reset (GR) or global set/reset (GSR) is active. GR for XC3000 is active-Low. GR for XC5200 and GSR (XC4000, Spartans, Virtex) default to active-High but can be inverted by adding an inverter in front of the GR/GSR input of the STARTUP or STARTUP_VIRTEX symbol.

Inputs
Outputs
CLR
J
K
C
Q
1
X
X
X
0
0
0
0

No Chg
0
0
1

0
0
1
0

1
0
1
1

Toggle

Figure 5.34 FJKC Implementation XC3000, XC4000, XC5200, Spartans, Virtex

Figure 5.35 FJKC Implementation XC9000

Next