Previous

FDC_1

D Flip-Flop with Negative-Edge Clock and Asynchronous Clear

XC3000
XC4000E
XC4000X
XC5200
XC9000
Spartan
SpartanXL
Virtex
Macro
Macro
Macro
Macro
N/A
Macro
Macro
Primitive

figures/x3847n.gif

FDC_1 is a single D-type flip-flop with data input (D), asynchronous clear input (CLR), and data output (Q). The asynchronous CLR, when active, overrides all other inputs and sets the Q output Low. The data on the D input is loaded into the flip-flop during the High-to-Low clock (C) transition.

The flip-flop is asynchronously cleared, output Low, when power is applied. For CPLDs, the power-on condition can be simulated by applying a High-level pulse on the PRLD global net. FPGAs simulate power-on when global reset (GR) or global set/reset (GSR) is active. GR for XC3000 is active-Low. GR for XC5200 and GSR (XC4000, Spartans, Virtex) default to active-High but can be inverted by adding an inverter in front of the GR/GSR input of the STARTUP or STARTUP_VIRTEX symbol.

Inputs
Outputs
CLR
D
C
Q
1
X
X
0
0
1

1
0
0

0

Figure 5.12 FDC_1 Implementation XC3000, XC4000, XC5200, Spartans

Next