You can adjust the color scheme of the ChipViewer if needed. To do this select:
Edit -> Change Color
The Color Template will appear.
The Color Template allows you to select specific types of pins or connections. After you select the feature you want to change, click Ok. The Color Chooser appears.
The Color Chooser has two formats: HSV and RGB. Select the tab for the format you want to use. Each format displays the currently selected color on the right side of the display. To operate the HSV display simply point the mouse to a part of the color circle and click. The color square will display the color you have selected. If this is the color you want, click OK. If you do not want the selected color, either select another part of the color circle or click Cancel. Clicking Reset will return the display to the original color.
If you want to use the RGB tab instead, click the RGB tab to see the RGB display. The color swab changes when you adjust the Red, Green, and Blue values. There are two ways to change the value of a color:
Click
and hold on the value pointer for a color, then slide the pointer
along the line, releasing the button when you reach the desired
value. Repeat for the other colors until you have color you want in
the display. Then, click OK.