To view current Timing Analyzer settings, select View 
Settings.
The Timing Analyzer displays a pop-up window with the current settings and options. The following figure displays an example of the Settings window.
Figure 4.1 Settings Window |  |
When this window is the active window and you change an option setting or a path filter, the change is immediately reflected in the window. If it is not the active window and you change an option or a filter, you must click inside the Settings window to update it automatically.
The contents of the window can be saved as a .xtm file to save the settings as a macro to return the system to the same state as when the settings were saved. See the “Saving a New Macro” and the “Running a Macro” sections for more information. You can also save the contents of the window to a .twr file. TWR files are listed as Timing Analysis Reports (*.twr) under List Files of Type in File menu command dialog boxes. See the “Saving a Report” section for the procedure to save a report.
