Previous

Downloading a Design to a Target Board

After you set up the appropriate cable and open a file to download, you can download the configuration data to a target board.

NOTE

If you plan to verify or debug a design, download a BIT file. You cannot verify or debug PROM files or RBT files. For more information, see the “Design Preparation” chapter.

  1. Select Download Download Design or click the following toolbar button.

    figures/bdnld.gif

    A download status window appears. This window includes a status bar that is updated as the data blocks are transmitted.

  2. If the design was downloaded successfully, a message appears informing you that the device is configured and provides you with the transmission time.

Next