This tutorial uses an XC4000E design and is targeted at the FPGA demonstration board. On the Alliance CD, the CALC tutorial is located at: /viewlog/tutorial/calc/calc_4ke for workstations or \viewlog\tutorial\calc\calc_4ke for PCs. On the Foundation CD, the CALC tutorial is located at: \active\projects\calc_4ke for PCs.
In addition to the demonstration board, you also need the XChecker cable. Although other cables are available from Xilinx, the XChecker cable is the only cable that has readback capabilities.
This tutorial assumes that you are familiar with your schematic entry tool and the Xilinx Design Manager. It also assumes that you have implemented your design. If you are not familiar with these tools or have not implemented your design, complete the tutorials for those tools prior to proceeding or see the Quick Start Guide.
