Viewing Settings

To view current Timing Analyzer settings, select View Settings.

The Timing Analyzer displays a pop-up window with the current settings and options. The following figure displays an example of the Settings window.

Figure 4.1 Settings Window

When this window is the active window and you change an option setting or a path filter, the change is immediately reflected in the window. If it is not the active window and you change an option or a filter, you must click inside the Settings window to update it automatically.

The contents of the window can be saved as an .xtm file to save the settings as a macro to return the system to the same state as when the settings were saved. See the “Saving a New Macro” and the “Running a Macro” sections for more information. You can also save the contents of the window to a .twr file. TWR files are listed as Timing Analysis Reports (*.twr) under List Files of Type in File menu command dialog boxes. See the “Saving a Report” section for the procedure to save a report.