This tutorial uses an XC4003E design and is targeted at the FPGA demonstration board. This board is not supplied with Foundation. The part number of the board is HW-FPGABOARD. In addition to the demonstration board, you also need the XChecker cable to perform synchronous and asynchronous debugging. Although other cables are available from Xilinx, the XChecker cable is currently the only cable that supports readback capabilities. This cable is not supplied in Foundation packages. Contact your Xilinx distributor or sales representative for information on how to obtain the board and the XChecker cable.
For information on downloading and hardware verification for CPLDs, refer to the following chapters in the Hardware User Guide.
