Highlighting a Net

To highlight a net in the EPIC window:

1. In the EPIC List window, set the “entity type” field to All Nets. (If the EPIC List window is not on the screen, select View Post List to display it.)
   
   
2. In the net listing, select CLK as shown in the figure below. The CLK net is colored red in the die window to show it is selected.
   
   

   Figure 8.3 Selecting CLK in the EPIC List

3. Select View Hilite from the EPIC menu bar or click the Hilite button on the right-hand side of the EPIC die window. The CLK net becomes highlighted.
   
   
4. Exit the editor by choosing File Exit from the menu bar. This brings you back to the Xilinx Design Manager.