Previous

Editing a PROM File

After building a PROM file, you can edit the file by moving BIT files to change the sequence of files in a data stream. You can also move data streams to change their sequence, or delete BIT files and data streams.

Moving BIT Files

To move a BIT file to a different location in the PROM file:

  1. In the hierarchical display in the PROM description area, select the BIT file you want to move.

  2. Select Edit Cut.

  3. In the PROM description area, select the entry above which you will add the BIT file.

  4. Select Edit Paste.

    You can also move BIT files using the following menu commands:

These commands are described in the “Menu Command Reference” chapter.

On a PC only, you can move a BIT file by dragging it from its current position in the PROM description area and dropping it into the desired position. As you move the BIT file within the PROM description area, an arrow to the left of the display indicates the position at which the BIT file will be placed.

Moving Data Streams

  1. In the hierarchical display in the PROM description area, select the data stream you want to move.

  2. Select Edit Cut.

  3. In the PROM description area, select the data stream above which you will add the cut data stream.

    To add the data stream to the end of the PROM Description area display, select the End PROM entry.

  4. Select Edit Paste.

You can also move data streams using the following menu commands.

These commands are described in the “Menu Command Reference” chapter.

On a PC only, you can move a data stream by dragging it from its current position in the PROM description area and dropping the data stream into the desired position. As you move the data stream within the PROM description area, an arrow to the left of the display indicates the position at which the data stream will be placed.

Duplicating BIT Files and Data Streams

You can duplicate BIT files or data streams in the PROM description area by using either of these sequences of menu commands.

These commands are described in the “Menu Command Reference” chapter.

Deleting BIT Files or Data Streams

To delete a BIT file or a data stream, select the entry you want to delete from the PROM description area and perform any of these actions.

Next