|
|
|
|
|
Click the Configuration, Startup, or Readback tab to access the different options within the Configuration Options dialog box. These options affect the Configure step in the implementation flow. Use the different tabs of this dialog box to set the options described in the following sections.
Click OK to accept the options, click Cancel to exit the dialog box without changing any settings, click Default to set the default options, or click Help to obtain online help.
Use this tab, shown in the following figure, to set the configuration options.
Figure 5.19 Spartan2 Configuration TabThe Spartan2 Configuration tab is identical to the tab described in the “Virtex Configuration Tab” section.
Use this tab, shown in the following figure, to set the configuration startup options.
Figure 5.20 Spartan2 Startup TabThe Spartan2 Startup tab is identical to the tab described in the “Virtex Startup Tab” section.
Use this tab, shown in the following figure, to set the configuration readback options.
Figure 5.21 Spartan2 Readback TabThe Spartan2 Readback tab is identical to the tab described in the “Virtex Readback Tab” section.