To implement the design, use the following Xilinx design tools. While this section does not discuss the following design implementation tools, NGDBuild, Map, PAR, BitGen, NGDAnno, and CPLD Fitter, you can find the command line options for each of these tools in the Xilinx manual Development System Reference Guide, with the exception of the CPLD command. That command is discussed in the “Fitter Command and Option Summary” appendix of the CPLD Schematic Design Guide.
You can find the following commands in the Development System Reference Guide.
You can also use the Xilinx Design Manager to implement your design. Refer to the “Using the Design Manager” chapter in the Xilinx manual, Design Manager/Flow Engine Reference/User Guide.
