Istype 'pos'
Unspecified Logic is 0

Syntax

signal_name [,signal_name] [PIN|NODE] ISTYPE 'pos' ;

Use

Signal attribute 'pos' indicates that unspecified logic should be given the value of 0.

Note: The 'neg' or 'pos' attribute is implied if a device is specified. For example, 'pos' is implied if the device output is not inverted.

Caution: The @DCSET directive overrides 'dc,' 'neg,' and 'pos'.

Note: 'dc,' 'neg,' and 'pos' are mutually exclusive.