|
|
|
|
|
Click the Translate, Optimize and Map, Place and Route, or Timing Reports tab to access the different options within the Implementation Options dialog box. These options affect the Translate, Map, and Place&Route steps in the implementation flow. Use the different tabs of this dialog box to set the options described in the following sections.
Click OK to accept the options, click Cancel to exit the dialog box without changing any settings, click Default to set the default options, or click Help to obtain online help.
Use the tab shown in the following figure, to set the translate options.
Figure 5.12 Spartan2 Translate TabThe Spartan2 Translate tab is identical to the tab described in the “Spartan Translate Tab” section.
Use this tab, shown in the following figure, to set the optimize and map options.
Figure 5.13 Spartan2 Optimize and Map TabThe Spartan2 Optimize and Map tab is identical to the tab described in the “Virtex Optimize and Map Tab” section.
Use this tab, shown in the following figure, to set the place and route options.
Figure 5.14 Spartan2 Place and Route TabThe Spartan2 Place and Route tab is identical to the tab described in the “Virtex Place and Route Tab” section.
Use the tab shown in the following figure, to set the timing reports options.
Figure 5.15 Spartan2 Timing Reports TabThe Spartan2 Timing Reports tab is identical to the tab described in the “Spartan Timing Reports Tab” section.